SET-2KNIFES Pottery tools set

D-L1: 20x3 cm, Maple Wood
D-L2: 18.5x2.9 cm, Cherry Wood

ORDER PREPARATION

The order preparation time is usually 1 to 3 business days as a general rule. Depending on the volume of orders, it could sometimes be delayed up to 10 days. Please note that all my products are made by hand in my workshop.

Pottery knifes or scrapers are tools for cutting clay from your pieces created with a potter's wheel or by hand. They are also useful for drawing shapes, outlining areas, scraping or cutting parts of the piece such as edges, low areas, feet and walls. With MillerCrafts Tools you can perform these tasks with ease and precision.

The beveled and sharp edges help you cut and scrape the clay or ceramic and create original lines and shapes in a very practical way.

MC Tools are designed and manufactured to facilitate the work of artists potters in their daily work molding clay but are also ideal for beginners who want to have a better mastery of their works and greater ease to create more interesting and surprising ceramic and clay pieces.

These tools are specially designed and manufactured with excellent quality wood, made with laser cutting, finally sanded and molded by hand.

The tool is initially protected with a mixture of mineral oil and beeswax, although occasional maintenance with natural products and very fine grit sandpaper is recommended.

-Wash by hand with water removing all clay or mud, towel dry and leave to air dry.
-Do not leave your tools submerged in water or soaked.
-When using the tool on the lathe, you can submerge it in the water in the basin to clean it but then leave it out, do not leave it floating.
-Do not use chemicals or abrasives.
-Apply mineral oil and beeswax ointment or other special wood oil occasionally.
-For occasional maintenance you can use very fine sandpaper 200+ and ointments or special natural oils for wood, let the product dry 24h before use.
-If at any time you notice that the wood is rougher than you like after the first use or at later times, you can gently sand the surface with fine sandpaper 200+ and reapply protection for a smoother finish to the touch. This aspect does not affect the proper functioning of the tool.
-The final product may have slight variations in color and wood grain due to the use of a natural raw material.